fds.analyticsapi.engines.UnlinkedPATemplatesApi

All URIs are relative to https://api.factset.com

Method	HTTP request	Description
create_unlinked_pa_templates	POST /analytics/engines/pa/v3/unlinked-templates	Create unlinked PA template
delete_unlinked_pa_templates	DELETE /analytics/engines/pa/v3/unlinked-templates/{id}	Delete unlinked PA template
get_default_unlinked_pa_template_types	GET /analytics/engines/pa/v3/unlinked-templates/template-types	Get default unlinked PA template types.
get_details_type	GET /analytics/engines/pa/v3/unlinked-templates/template-types/{id}	Get unlinked PA template type details by id.
get_unlinked_pa_templates	GET /analytics/engines/pa/v3/unlinked-templates	Get unlinked PA templates
get_unlinked_pa_templates_by_id	GET /analytics/engines/pa/v3/unlinked-templates/{id}	Get unlinked PA template details by id
update_unlinked_pa_templates	PUT /analytics/engines/pa/v3/unlinked-templates/{id}	Update unlinked PA template

create_unlinked_pa_templates

UnlinkedPATemplatePostSummaryRoot create_unlinked_pa_templates(unlinked_pa_template_parameters_root)

Create unlinked PA template

This endpoint creates a template which is not linked to any specific PA3 tile. Remarks: * Mandatory fields are required to be passed in POST requests and Optional fields are not necessary. If no mandatory fields are passed, then we can use the template as a component and skip the component creation. * Mandatory, optional and locked fields can be "accounts", "benchmarks", "groups", "columns", "datasources", "dates", "currencyisocode" and "componentdetail". * We cannot override the Locked fields when creating the Component. * Mandatory and locked strings are mutually exclusive. * Any settings in the POST body will act as a one-time override over the settings saved in the PA template. * Account identifiers must have .ACCT or .ACTM extension or BENCH: prefix. Holdings mode can be optionally set for every account. Possible values for holdings mode are B&H (Buy and Hold), TBR (Transaction based returns), OMS (Order Management System), VLT (Vaulted returns) or EXT (External Returns Data). Default holdings mode value is B&H. * Multi-horizon frequencies are not supported through this endpoint. * Componentdetail supports securities, groups, groupsall, and totals levels of granularity. However, if no value is passed, the default value is ‘securities’. Additionally, while ‘groupsall’ returns all the group levels in the PA component, setting componentdetail to ‘groups’ only returns the expanded or collapsed group levels within the PA component. * If we are overriding the grouping with a frequency, we will be overriding the grouping saved to the original component and also overriding the default frequency of the Beginning of Period to whatever we pass in the request body. * If we are overriding grouping frequency without overriding the group id it will not be applied to the default groupings saved to the original component.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_post_summary_root import UnlinkedPATemplatePostSummaryRoot from fds.analyticsapi.engines.model.unlinked_pa_template_parameters_root import UnlinkedPATemplateParametersRoot from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

with fds.analyticsapi.engines.ApiClient(configuration) as api_client: # Create an instance of the API class api_instance = unlinked_pa_templates_api.UnlinkedPATemplatesApi(api_client) unlinked_pa_template_parameters_root = UnlinkedPATemplateParametersRoot( data=UnlinkedPATemplateParameters( directory=”directory_example”, template_type_id=”template_type_id_example”, description=”description_example”, accounts=[ PAIdentifier( id=”id_example”, holdingsmode=”holdingsmode_example”, ), ], benchmarks=[ PAIdentifier( id=”id_example”, holdingsmode=”holdingsmode_example”, ), ], columns=[ PACalculationColumn( id=”id_example”, statistics=[ “statistics_example”, ], ), ], dates=PADateParameters( startdate=”startdate_example”, enddate=”enddate_example”, frequency=”frequency_example”, ), groups=[ PACalculationGroup( id=”id_example”, frequency=”frequency_example”, ), ], datasources=PACalculationDataSources( portfoliopricingsources=[ PACalculationPricingSource( id=”id_example”, ), ], benchmarkpricingsources=[ PACalculationPricingSource( id=”id_example”, ), ], useportfoliopricingsourcesforbenchmark=True, ), currencyisocode=”currencyisocode_example”, componentdetail=”componentdetail_example”, content=TemplateContentTypes( mandatory=[ “mandatory_example”, ], optional=[ “optional_example”, ], locked=[ “locked_example”, ], ), ), meta=None, ) # UnlinkedPATemplateParametersRoot | Request Parameters

# example passing only required values which don't have defaults set
try:
    # Create unlinked PA template
    api_response = api_instance.create_unlinked_pa_templates(unlinked_pa_template_parameters_root)
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->create_unlinked_pa_templates: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
unlinked_pa_template_parameters_root	UnlinkedPATemplateParametersRoot	Request Parameters

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplatePostSummaryRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: application/json
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 201 | Expected response, created a unlinked PA template. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

delete_unlinked_pa_templates

delete_unlinked_pa_templates(id)

Delete unlinked PA template

This endpoint deletes an existing unliked PA template.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

# example passing only required values which don't have defaults set
try:
    # Delete unlinked PA template
    api_instance.delete_unlinked_pa_templates(id)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->delete_unlinked_pa_templates: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
id	str	Unique identifier for an unlinked PA template

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: None (empty response body)

Authorization

Basic, Bearer

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 204 | Expected response, deleted the unlinked PA template successfully. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 404 | Template not found. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

get_default_unlinked_pa_template_types

UnlinkedPATemplateCategoryAndTypeRoot get_default_unlinked_pa_template_types()

Get default unlinked PA template types.

This endpoint fetches default unlinked PA template types.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_category_and_type_root import UnlinkedPATemplateCategoryAndTypeRoot from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

with fds.analyticsapi.engines.ApiClient(configuration) as api_client: # Create an instance of the API class api_instance = unlinked_pa_templates_api.UnlinkedPATemplatesApi(api_client)

# example, this endpoint has no required or optional parameters
try:
    # Get default unlinked PA template types.
    api_response = api_instance.get_default_unlinked_pa_template_types()
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->get_default_unlinked_pa_template_types: %s\n" % e) ```

Parameters

This endpoint does not need any parameter.

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplateCategoryAndTypeRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 200 | Expected response, default unlinked PA template types | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

get_details_type

UnlinkedPATemplateCategoryAndTypeDetailsRoot get_details_type(id)

Get unlinked PA template type details by id.

This endpoint fetches the unlinked PA template type details.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_category_and_type_details_root import UnlinkedPATemplateCategoryAndTypeDetailsRoot from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

# example passing only required values which don't have defaults set
try:
    # Get unlinked PA template type details by id.
    api_response = api_instance.get_details_type(id)
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->get_details_type: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
id	str	Unique identifier for an unlinked PA template type

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplateCategoryAndTypeDetailsRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 200 | Expected response, details of the unlinked PA template type | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 404 | Unlinked PA template type not found. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

get_unlinked_pa_templates

UnlinkedPATemplateSummaryRoot get_unlinked_pa_templates()

Get unlinked PA templates

This endpoint returns the list of unlinked PA templates.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_summary_root import UnlinkedPATemplateSummaryRoot from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

with fds.analyticsapi.engines.ApiClient(configuration) as api_client: # Create an instance of the API class api_instance = unlinked_pa_templates_api.UnlinkedPATemplatesApi(api_client) directory = “Personal:UninkedPATemplates/” # str | Get unlinked PA templates in path. (optional) category = “Weights” # str | Get unlinked PA templates by category. (optional)

# example passing only required values which don't have defaults set
# and optional values
try:
    # Get unlinked PA templates
    api_response = api_instance.get_unlinked_pa_templates(directory=directory, category=category)
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->get_unlinked_pa_templates: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
directory	str	Get unlinked PA templates in path.	[optional]
category	str	Get unlinked PA templates by category.	[optional]

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplateSummaryRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 200 | Expected response, returns a list of unlinked PA templates. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

get_unlinked_pa_templates_by_id

UnlinkedPATemplateRoot get_unlinked_pa_templates_by_id(id)

Get unlinked PA template details by id

This endpoint fetches the template settings.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_root import UnlinkedPATemplateRoot from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

# example passing only required values which don't have defaults set
try:
    # Get unlinked PA template details by id
    api_response = api_instance.get_unlinked_pa_templates_by_id(id)
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->get_unlinked_pa_templates_by_id: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
id	str	Unique identifier for an unlinked PA template

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplateRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 200 | Expected response, get details of the unlinked PA template. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 404 | Template not found. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

update_unlinked_pa_templates

UnlinkedPATemplatePostSummaryRoot update_unlinked_pa_templates(id, unlinked_pa_template_update_parameters_root)

Update unlinked PA template

This endpoint updates an existing unlinked PA template. Remarks: * Mandatory fields are required to be passed in POST requests and Optional fields are not necessary. If no mandatory fields are passed, then we can use the template as a component and skip the component creation. * Mandatory, optional and locked fields can be "accounts", "benchmarks", "groups", "columns", "datasources", "dates", "currencyisocode" and "componentdetail". * We cannot override the Locked fields when creating the Component. * Mandatory and locked strings are mutually exclusive. * Any settings in the POST body will act as a one-time override over the settings saved in the PA template. * Account identifiers must have .ACCT or .ACTM extension or BENCH: prefix. Holdings mode can be optionally set for every account. Possible values for holdings mode are B&H (Buy and Hold), TBR (Transaction based returns), OMS (Order Management System), VLT (Vaulted returns) or EXT (External Returns Data). Default holdings mode value is B&H. * Multi-horizon frequencies are not supported through this endpoint. * Componentdetail supports securities, groups, groupsall, and totals levels of granularity. However, if no value is passed, the default value is ‘securities’. Additionally, while ‘groupsall’ returns all the group levels in the PA component, setting componentdetail to ‘groups’ only returns the expanded or collapsed group levels within the PA component. * If we are overriding the grouping with a frequency, we will be overriding the grouping saved to the original component and also overriding the default frequency of the Beginning of Period to whatever we pass in the request body. * If we are overriding grouping frequency without overriding the group id it will not be applied to the default groupings saved to the original component.

Example

Basic Authentication (Basic):
Bearer Authentication (Bearer): ```python import time import fds.analyticsapi.engines from fds.analyticsapi.engines.api import unlinked_pa_templates_api from fds.analyticsapi.engines.model.unlinked_pa_template_update_parameters_root import UnlinkedPATemplateUpdateParametersRoot from fds.analyticsapi.engines.model.unlinked_pa_template_post_summary_root import UnlinkedPATemplatePostSummaryRoot from fds.analyticsapi.engines.model.client_error_response import ClientErrorResponse from pprint import pprint
Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

configuration = fds.analyticsapi.engines.Configuration( host = “https://api.factset.com” )

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

configuration = fds.analyticsapi.engines.Configuration( username = ‘YOUR_USERNAME’, password = ‘YOUR_PASSWORD’ )

Configure Bearer authorization: Bearer

configuration = fds.analyticsapi.engines.Configuration( access_token = ‘YOUR_BEARER_TOKEN’ )

Enter a context with an instance of the API client

with fds.analyticsapi.engines.ApiClient(configuration) as api_client: # Create an instance of the API class api_instance = unlinked_pa_templates_api.UnlinkedPATemplatesApi(api_client) id = “01234567890123456789012345678901” # str | Unique identifier for an unlinked PA template unlinked_pa_template_update_parameters_root = UnlinkedPATemplateUpdateParametersRoot( data=UnlinkedPATemplateUpdateParameters( description=”description_example”, accounts=[ PAIdentifier( id=”id_example”, holdingsmode=”holdingsmode_example”, ), ], benchmarks=[ PAIdentifier( id=”id_example”, holdingsmode=”holdingsmode_example”, ), ], columns=[ PACalculationColumn( id=”id_example”, statistics=[ “statistics_example”, ], ), ], dates=PADateParameters( startdate=”startdate_example”, enddate=”enddate_example”, frequency=”frequency_example”, ), groups=[ PACalculationGroup( id=”id_example”, frequency=”frequency_example”, ), ], datasources=PACalculationDataSources( portfoliopricingsources=[ PACalculationPricingSource( id=”id_example”, ), ], benchmarkpricingsources=[ PACalculationPricingSource( id=”id_example”, ), ], useportfoliopricingsourcesforbenchmark=True, ), currencyisocode=”currencyisocode_example”, componentdetail=”componentdetail_example”, content=TemplateContentTypes( mandatory=[ “mandatory_example”, ], optional=[ “optional_example”, ], locked=[ “locked_example”, ], ), ), meta=None, ) # UnlinkedPATemplateUpdateParametersRoot | Request Parameters

# example passing only required values which don't have defaults set
try:
    # Update unlinked PA template
    api_response = api_instance.update_unlinked_pa_templates(id, unlinked_pa_template_update_parameters_root)
    pprint(api_response)
except fds.analyticsapi.engines.ApiException as e:
    print("Exception when calling UnlinkedPATemplatesApi->update_unlinked_pa_templates: %s\n" % e) ```

Parameters

Name	Type	Description	Notes
id	str	Unique identifier for an unlinked PA template
unlinked_pa_template_update_parameters_root	UnlinkedPATemplateUpdateParametersRoot	Request Parameters

Return type

A tuple with response data, HTTP status code and response headers.
Response datatype: UnlinkedPATemplatePostSummaryRoot

Authorization

Basic, Bearer

HTTP request headers

Content-Type: application/json
Accept: application/json

HTTP response details

| Status code | Description | Response headers | |————-|————-|——————| 200 | Expected response, updated the unlinked PA template. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 400 | Invalid data provided. Please check the request parameters before attempting again. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 404 | Template not found. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 401 | Missing or invalid authentication. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 403 | User is forbidden with current credentials | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 406 | Unsupported Accept header. Header needs to be set to application/json. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* X-FactSet-Api-RateLimit-Limit - Number of allowed requests for the time window.
* X-FactSet-Api-RateLimit-Remaining - Number of requests left for the time window.
* X-FactSet-Api-RateLimit-Reset - Number of seconds remaining till rate limit resets.
| 429 | Rate limit reached. Wait till the time specified in Retry-After header value to make further requests. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
* Retry-After - Time to wait in seconds before making a new request as the rate limit has reached.
| 500 | Server error. Log the X-DataDirect-Request-Key header to assist in troubleshooting. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
| 503 | Request timed out. Retry the request in sometime. | * X-DataDirect-Request-Key - FactSet's request key header.
* X-FactSet-Api-Request-Key - Key to uniquely identify an Analytics API request. Only available after successful authentication.
|

[Back to top] [Back to API list] [Back to Model list] [Back to README]

fds.analyticsapi.engines.UnlinkedPATemplatesApi

create_unlinked_pa_templates

Example

Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

Configure Bearer authorization: Bearer

Enter a context with an instance of the API client

Parameters

Return type

Authorization

HTTP request headers

HTTP response details

delete_unlinked_pa_templates

Example

Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

Configure Bearer authorization: Bearer

Enter a context with an instance of the API client

Parameters

Return type

Authorization

HTTP request headers

HTTP response details

get_default_unlinked_pa_template_types

Example

Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

Configure Bearer authorization: Bearer

Enter a context with an instance of the API client

Parameters

Return type

Authorization

HTTP request headers

HTTP response details

get_details_type

Example

Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

Configure Bearer authorization: Bearer

Enter a context with an instance of the API client

Parameters

Return type

Authorization

HTTP request headers

HTTP response details

get_unlinked_pa_templates

Example

Defining the host is optional and defaults to https://api.factset.com

See configuration.py for a list of all supported configuration parameters.

The client must configure the authentication and authorization parameters

in accordance with the API server security policy.

Examples for each auth method are provided below, use the example that

satisfies your auth use case.

Configure HTTP basic authorization: Basic

Configure Bearer authorization: Bearer

Enter a context with an instance of the API client

Parameters

Return type

Authorization

HTTP request headers